+- Revolution Mall Forums (https://revolutionmall.co.uk/forum)
+-- Forum: Modding Zone (https://revolutionmall.co.uk/forum/forumdisplay.php?fid=8)
+--- Forum: SmackDown Series (https://revolutionmall.co.uk/forum/forumdisplay.php?fid=329)
+---- Forum: WWE SmackDown vs Raw Series (https://revolutionmall.co.uk/forum/forumdisplay.php?fid=57)
+----- Forum: Help (https://revolutionmall.co.uk/forum/forumdisplay.php?fid=66)
+----- Thread: Help Me About Tutorial For Adding Entrance for No Model (/showthread.php?tid=5741)
Help Me About Tutorial For Adding Entrance for No Model - Deleted User - 04-10-2012
[table][tr][td]Tutorial For Adding Entrances for No Model Characters
There is a folder EVT inside the PAC folder.In the folder EVT there are files named NYUJYO0.PAC,NYUJO1.PAC,NYUJO2.PAC,NYUJO3.PAC.
NYUJYO0.PAC contains Entrance motions for all the wrestlers till ID No.200.
NYUJO1.PAC contains motions for all wrestlers from ID no. 201 to ID no.303.
NYUJO2.PAC contains pre made entrances.
NYUJO3.PAC contains entrances for Tag Teams and Trios.
Now for assigning entrances to No Model Characters,you just need to copy and paste the EVP and EVT BPE files from NYUJO2.PAC at the end of NYUJO0.PAC or NYUJO1.PAC depending upon the ID no. of the No Model.
In NYUJO2.PAC,search for string EVP3.You will see there will be a lot of IDs and following these IDs will be their XX and YY values.So just go the offset and select the no of bytes equal to size and paste it at the end of NYUJO0.PAC or NYUJ01.PAC.
Example:
Kurt Angle's entrance is stored with an ID no. 500.It has XX=5900 and YY=0B00.
Therefore Offset=0x30800 and Size=0x0B00.
Search for the string BPE and go the BPE with this offset and select data upto next BPE.Copy and paste the file at a valid offset(i.e. ending with 000 or 800) of NYUJO0.PAC or NYUJ01.PAC.You will note that at the first valid offset there will be 4 bytes having value 39 39 39 39.You need not worry about them.Just paste the data before them and make sure that these bytes are moved to the next valid offset.This is for his EVP file and Similarly there will be one EVT file also with an ID no. 500.
Now calculate the value of XX and YY for the pasted files.Then in the .ARC file in the sections EVT1 and EVP1 just insert a string NNN XXYY where NNN represents the No Model Char number.Also add 0300 to the no. following EVP1 and EVT1.[/td][/tr][/table]
[table][tr][td]sorry my bad endlish[/td][/tr][/table]
[table][tr][td]This tutorial use in svr 2011 ?
How do ? I don't understand
Can you tell me about do it ?
I thank you in advance[/td][/tr][/table]
Help Me About Tutorial For Adding Entrance for No Model - Cue - 04-10-2012
ryutaro? Why ask the same question with the same type of broken English? Wanna get banned again?