Hi guys !
Well, .... I haven't contributed since a long time and i have created this simple extractor !
The usage is pretty easy Just load your main pac for example : CH2.PAC and then enter XX and YY of the wanted file in the correct text-boxes and click on Extract !
Screenshot :
![[Image: t7Sl3Fx.png]](http://i.imgur.com/t7Sl3Fx.png)
Notes :
-These Secondary text-boxes It's Just gives you offset and size you must enter XX & YY in the text-boxes on the top
- Check your Extracted file first in a Hex editor it might need uncompressing
Download The Tool
Cheers ! :toast:
Well, .... I haven't contributed since a long time and i have created this simple extractor !
The usage is pretty easy Just load your main pac for example : CH2.PAC and then enter XX and YY of the wanted file in the correct text-boxes and click on Extract !
Screenshot :
![[Image: t7Sl3Fx.png]](http://i.imgur.com/t7Sl3Fx.png)
Notes :
-These Secondary text-boxes It's Just gives you offset and size you must enter XX & YY in the text-boxes on the top
- Check your Extracted file first in a Hex editor it might need uncompressing
Download The Tool
Cheers ! :toast:
